Breezaire WKSL 4000
When our self-contained series will not meet your needs then the WKSL split design will provide the flexibility needed to create an ideal installation or deal with unusual site problems. Breezaire WKSL Series cooling systems are special split systems that allow mounting of the cooling (evaporator) module in the enclosure to be cooled and the exhaust (condenser) module as far as 50 feet away. The systems are designed – when installed in a properly constructed enclosure – to provide a constant selectable temperature between 48 and 63 degrees Fahrenheit while maintaining 50 to 75 percent relative humidity.
WKSL Series systems are designed for easy installation by any, properly equipped, qualified air conditioning or refrigeration service technician. Two copper tubes and low voltage wiring connect the two modules and power is hard wired to the units using adequately sized 110 AC volt electrical source. These systems must be charged with refrigerant during installation. The WKSL series uses Breezaire's Sentry II+ digital control system for complete control of the enclosure conditions.
There are 2 models to choose from:
|Models||Cu.Ft Bottles BTU||Electrical||Dimensions (WxHxD) Weight|
|WKSL 2200 Fan/Coil||265 . 1000 2200||1 Amps||14.25W x 14.125H x 7.75D 25 lb|
|WKSL 2200 Condenser||265 . 1000 2200||4 Amps||14.25W x 14.125H x 11.25D 35 lb|
|WKSL 4000 Fan/Coil||1000 . 4000 4000||1.5 Amps||16.25W x 22.00H x 22.25D 45 lb|
|WKSL 4000 Condenser||1000 . 4000 4000||7.5 Amps||16.25W x 22.00H x 22.25D 55 lb|
a) All units are 115 Volt, 60 Hz.
b) All four models can be manufactured with the hot air out the rear (standard) or out the top of unit (special order).
c) All four models come with the electric cord out the front (standard) or can be routed out the rear (special order).
d) All four models are shipped from the factory with the unit configured with the cold air routed out the front with the option of routing the cold air out the top by the installer.
e) All four models may be ordered with optional leads for connection to external alarm system. (special order).
f) These 2 units are ceiling mounted
g) Our prices include Shipping and Handling within the Continental USA - Sales Tax not included where applicable
HUMIDITY & INSTALLATION: By the nature of their operation, wine cooling units will maintain a stable humidity level, lower than the relative ambient humidity. In situations where the ambient humidity is high, the cooling unit will lower the humidity to desirable storage levels. In situations where the ambient relative humidity is very low, the desired enclosure relative humidity may not be achieved without adding moisture. To add moisture to the enclosure only use slow, natural evaporation from a small porous water container. Do not use a humidifier.
TEMPERATURE & INSTALLATION: These wine cellar cooling units are designed to cool 25 degrees less than the ambient temperature of the venting side of the unit. In some cases, improper placement or installation may cause the unit's performance to be degraded. The condensing unit must have a constant supply of fresh air, less than 85 degrees F. If the condensing unit is located in a confined area with poor ventilation, the unit will not be able to reject the heat it is removing from the enclosure and a malfunctioning unit will be suspected, even though the unit is mechanically sound.
Adjustable Temperature The ideal temperature for storing and aging wine is between 50 and 60 degrees Fahrenheit. Each BREEZAIRE system includes an adjustable thermostat that makes it possible for the user to precisely control the conditions in the wine cellar. When initially bringing the temperature down to the desired level and in maintaining the target temperature, the system produces a gentle stream of cool air - never a blast of cold air that could subject the wine to abrupt temperature changes.
Automatic Humidity Control Humidity must be present in the wine cellar to prevent cork and label deterioration. The gentle cooling action of the BREEZAIRE system maintains the relative humidity in the 50 to 75 percent range, eliminating excess moisture but never allowing the air to become dry enough to create an undesirable condition. (Additional moisture may be required in extreme dry climates.
Vibration-Free Operation All Breezaire systems are engineered to be vibration free, hand assembled, and tested to ensure that they meet the most exacting standards. The elimination of vibration levels that may be undetectable to the owner results in wines that have greater clarity and brilliance.
Ultra Quiet Operation Breezaire systems perform their task quietly and unobtrusively to preserve the atmosphere of isolation from the outside world that makes a visit to a wine cellar an unique experience.
Attractive Metal Cabinet An attractive metal cabinet that blends in with the décor of your cellar area and can be flush mounted to any wall.
Ease of Installation Breezaire's most popular systems are completely self-contained modules that are simply mounted in a wall and connected to a standard 115AC source. No plumbing, complicated wiring or special procedures including the on-site installation of refrigerant are required.
Uncompromising Quality All Breezaire systems are designed to deliver superior performance. Constructed using only the highest quality components, and hand assembly by skilled craftsmen in our U.S. production facilities.
Shipping & Handling is not included - Sales Tax not included where applicable - select from drop down menus