Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!

Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!

BCS - Maintenance

BCS - Maintenance
Product Code: bcs maintenance
Reward Points: 0
Availability: In Stock
Price: $0.00
Ex Tax: $0.00
   - OR -   


Have your system checked each year by a certified refrigeration technician. He should:

Sump Drain Cap
  1. Clean the indoor and outdoor coils.
  2. Change the water filter on the Humidification models, and change out the humidification mister head.
  3. Drain the Stainless steel sump (Diagram 3), and clean it if necessary. This will prevent any possible mold build up.
  4. Check the operation of the condensate pump, and make sure the water misting fitting is acting properly, by allowing water to flow thru it. Clean with vinegar if clogged and change the water filter.
  5. Check the electronic controller for any alarm conditions.
  6. Check the refrigerant level and system operating pressures.
  7. Clean the water solenoid on a yearly basis, and change it out every two years. Warning: If the water solenoid sticks open, overflow can result.


Unit will not reach temperature Call your installation contractor to Determine proper refrigerant charge. Dirty condenser?
Unit has shut off Call BSC tech services or field Service; could be bad Compressor, fans, controller or Pump

Alarm conditions on the electronic controller email us at


Alarm Signaling


Message Cause Outputs
“P1” Thermostat probe failure Compressor and heating outputs off (on dehumidification system only)
“P3” Humidity probe failure Humidity regulation off
“HA” High temp alarm Outputs unchanged
“LA” Low temperature alarm Outputs unchanged
“HHA” High humidity alarm Outputs unchanged
“HLA” Low humidity alarm Outputs unchanged

In the instance of any of these alarms, call Bacchus Technical Services, or your local service contractor


Dimensional / Electrical

  BCS1000 Cond.Unit BCS1000 Evap BCS1500 Cond Unit BCS1500 Evaporator BCS2000 Cond Unit BCS3000 Cond Unit
Dimensions 17″D x 13.3″W x 11.8″H 18″D x 29.25″W x 6.5″H 19″D x 16.2″W x 14″H 18″D x 29.25″W x 6.5″H 19″D x 21′W x 16.5″H 25″ D x 20″W x 16″H
Weight 51 lbs. 49 lbs. 62 lbs. 51 lbs. 81 lbs. 135 lbs.
Refrigerant connection 3/8″ suc. 1/4″ dis. 3/8″sw 3/8″ suc. 1/4″ dis. 3/8″ sw x 1/2″ sw 3/8″suc. 5/16″ dis. 1/2″suc. 3/8″ dis.
Water Supply connection 1/4″ compression 1/4″ compression
Condensate connection 3/8″ mpt 3/8″ mpt
Compressor HP / voltage 1/2 hp 115v .65 hp115v 1 hp 115v 1 1/2 hp 208/230-1v
Compressor RLA 10A 11A 8A 12.1A
Compressor LRA 53A 51A 43A 49A
Cond. Unit MFS 20A 30A 15A 17.6A
Cond. Unit MCA 13.4A 13.4A 11.3A 12.1A
BTU capacity 40F Suc., 110 Amb. 4857 6250 10200 (100f amb) 12,185


Related Products

Wine Storage - Wine Cellar Cabinets - Wine Accessories - Cooling Systems - Wine Racks - Vintage View - Wine Coolers
© 1996- | Bacchus Wine Cellars | All Rights Reserved