Cellar Pro - 6000S
CellarPro 6000S Wine Cellar Refrigeration System designed for Wine Cellars up to 1500 Cu. Ft. Rated for Internal or External Applications / 1/2 Ton Refrigeration System / Advanced Evaporator with a Variable-Speed Centrifugal Fan / Adjustable Humidity Control via Digital Display / 1/2" ID Drain Line / Electronic Thermostat with Digital LED Display and Audible/Visual Alarms / Auto-Defrost Cycle / ETL Tested and Certified (UL Standards - Pending).
The Evaporator Unit is designed to mount on the wall near the top of the Wine Cellar. Outside of the Wine Cellar, the Condensing Unit is attached to the Evaporator Unit by a Line-Set that can run up to 100 equivalent feet. The Line-Set is sold separately. The Evaporator Unit uses a variable-Speed Centrifugal Fan with three different settings including: (1) "High" - setting for maximum performance, and (2) "low" - for super-quiet operation.
The Condensing Unit is designed to handle environments ranging from 0°F to 110°F. The Condensing Unit requires 12 inches of unobsturcted space in front of the coils, and requires 600-700 CFM of ventilation when installed in a confined space.
The Cellarpro 6000S Wine Cellar Refrigeration System is Designed for Wine Cellars up to 1500 Cu. Ft. and is rated for internal or external applications. This Wine Cellar Refrigeration System is a 1/2 Ton Refrigeration System that allows the noise from the Condensing Unit to be removed from living areas, and eliminates the need for large holes in your cellar wall.
Inside the Cellar, the Evaporator Unit is designed to mount on the wall near the top of the Wine Cellar. Outside the Cellar, the Condensing Unit is attached to the Evaporator Unit by a Line-Set (sold Separately) up to 100 Equivalent feet (and up to 30 vertical feet). Please Note: A few small openings for the Line-Set and Drain Line are required to connect the Evaporator and Condensing Units.
The Advanced Evaporator Unit uses a Variable-Speed Centrifugal Fan with Three Settings. The Settings include a "high" setting that allows for maximum performance, as well as a "low" setting for super-quiet operation. Please Note: The Evaporator Unit should be mounted close to the ceiling inside the cellar.
The High Performance Condensing Unit is designed to handle environments ranging from 0°F to 110°F. The Condensing Unit requires 12 inches of unobstructed space in front of the coils, and requires approx. 600-700 CFM of ventilation when installed in a confined space.
Additional Options: (see pictures above)
- Cellar Pro Remote Display Control Unit - Add $295
- Cellar Pro Cold Temperature Compressor Heater - Add $175
- Cellar Pro Split System Oudoor Hood - Add $395
- Cellar Pro Bottle Probe - Add $150
- Cellar Pro 3200/4200 Duct Kit (for the Rear) - Add $375
- Cellar Pro 3200/4200 Duct Kit with Fan (for the Rear) - Add $399
- Cellar Pro 3200/4200 Duct Kit (for Front) - Add $499
- White Louvered Grill - Add $75
- CP Louvered Wood Grill Cover - Add $199
- Optional 5 Years Limited Extended Warranty - Add $99
- Shipping & Handling as well as Sales Tax (due where applicable) from the drop down menu.
- Warranty: Labor 2yrs - Parts 5yrs