CellarMate 088 Professional Cooling Systems
UNIT SOLD UNIT SOLD UNIT SOLD
(our SRP is $6,595)
CellarMate/Wine Guardian Cooling systems feature industrial grade aluminum construction to prevent rusting.
CellarMate/Wine Guardian Features:
Cellarmate Cooling System Specifications |
Model/Item # | Unit Size H "x W" x D" |
Maximum
Cu.Ft /BTU
|
Volts/Amps |
Sales Tax
Shipping
not included
|
WG- d025 item# CM-025-WG |
14.25 /23.5 /47.5 |
800 cu.ft
3300 BTU
|
115/20 |
|
WG- d050 item # CM-050-WG |
14.25 /23.5 /47.5 |
1500 cu.ft
5600 BTU
|
115/20 |
|
Wine Guar d088 item # WG-d088-WG1T |
14.25 /23.5 /47.5 |
3000 cu.ft
8400 BTU
|
208/10 |
|
WG 200 Item# CM-200-WG |
18.25 /23.5 /47.5 |
5500 cu.ft
18000 BTU
|
208/10 |
|
Sales Tax not included in the Options - we will add it up manually
Cellarmate/WGuardian Accessories | Item # | Prices |
CellarMate Accessory Kit (2 Duct Collars & 25' Flex Duct) |
CM-ACC Kit | $299 |
CellarMate 10" Duct Collars | CM-10-DC | $109 |
CellarMate 25' Flex Duct | CM-25-FLX | $129 |
Cellarmate pre-filter | CM-Pre Filter | $175 |
Cellarmate Heater | CM-Heater | $795 |
Cellarmate Humidifier | CM-Humidifier | $550 |
Sales Tax not included in the Options - we will add it up manually
Additional Options
All Options are factory-installed and require a 30-day lead time.
Humidifier - The humidifier is designed for field installation and can be retrofitted onto existing CellarMate units. Each humidifier model is furnished with an electronic digital humidistat to control the humidity in the cellar. The humidifier mounts onto the CellarMate unit using the common drain, and requires a hot water supply. No additional external power is required.
The CellarMate humidifier uses a 10" wide x 11" high x 2" thick pad. The rated output capacity for wine cellars at 55°F is 1.62.3 gallons per day (gpd) with 760°F water supply, 34.57 gpd with 950°F water, and 7.45.1 gpd with 120°F water. Weight of operating humidifier is 10 lbs.
No maintenance is required for the heating coil. To test the heating coil operation, set the thermostat on heat and set the temperature above the cellar temperature. The supply air temperature should rise above the return air.
Low Ambient Kit - This option is recommended for applications where the ambient temperatures in the mounting area are 40°F or lower. The low-ambient option utilizes a low-pressure switch and compressor crankcase heater.
Options are factory-installed and require a 30-day lead time.
Flexible Ducting - The flexible ducting is a 25’ foot length of 10" insulated ducting for the CM050, CM088, and CM200 and 8" insulated ducting for the CM025.